• Perform warehouse duties related to receiving, shipping, and storing raw materials and finished goods.
• Load, unload, move, and store materials using a sit-down forklift and other warehouse equipment.
• Transport materials between loading docks, trucks, production areas, and storage locations.
• Verify incoming and outgoing shipments for accuracy and inspect materials for quality.
• Review shipping and receiving documentation to ensure accuracy.
• Secure shipments using protective materials, strapping equipment, and proper packaging techniques.
• Stack and organize drums, pallets, skids, and other warehouse supplies in designated storage areas.
• Assist with cycle counts, inventory control, and physical inventories.
• Support production by ensuring materials are delivered accurately and on schedule.
• Follow all company policies, standard operating procedures, and OSHA safety regulations.
• Maintain a clean, organized, and safe work environment through daily housekeeping.
• Perform other warehouse-related duties as assigned.
• Maintain regular and reliable attendance.

• Minimum of one year of verified sit-down forklift (Powered Industrial Truck) experience preferred.
• Must successfully complete a practical forklift evaluation prior to hire.
• Clamp forklift experience is preferred.
• Experience using RF scanners is preferred.
• Ability to safely operate forklifts and other warehouse equipment.
• Strong attention to detail with the ability to accurately verify shipments and inventory.
• Basic math and written communication skills.
• Ability to work independently and in a fast-paced warehouse environment.
• Commitment to workplace safety and proper handling of equipment to prevent damage or loss.
• High school diploma or GED is not required.

• Operate fabrication equipment, including cutoff saws, shears, rolls, brakes, presses, forming machines, spinning machines, and punch machines.
• Perform manual machine operations or any other task assigned to produce quality parts that meets all print requirements.
• Must be able to read and understand engineering and other relevant drawings.
• Able to make change of jigs, fixtures, with minimum assistance from shop leads.
• Follow detailed operation instructions, processes, and procedures.
• Follow documented policies and procedures as designated by the company’s Quality System
• Comply with all company safety and security policies including use of PPE.
• Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions on equipment.
• Perform other duties as assigned.

• High School Diploma or GED
• Relevant work experience including 1 year of previous machining experience.
• Experienced in the proper and safe use of hand and light power tools.

• Performs hands-on assembly of mechanical components, ensures parts meet t quality specifications
• Supports inventory/organization of materials
• Assists with final inspection and packaging to meet daily production goals. 
• Fast paced yet peaceful environment with fellow workers that have been with the company longterm.

• Assembles components by examining connections for correct fit
• Fastening parts and completing task in specific area of production line
• Maintain safe and clean working environment by complying with procedures, rules and regulations
• Documents actions by completing production and quality forms
• Contributes to team effort and environment positively

• Set up and operate rubber press machines according to production requirements. 
• Load materials and remove finished products. 
• Monitor machine performance and make basic adjustments as needed. 
• Inspect finished parts for quality and document inspection results. 
• Perform routine cleaning and basic preventive maintenance. 
• Troubleshoot minor machine issues and report major repairs. 
• Maintain a clean and safe work area. 
• Follow all safety policies and wear required PPE. 
• Complete production records and assist with other duties as assigned. 

• Previous manufacturing or press operator experience required. 
• Mechanical aptitude and attention to detail. 
• Ability to read work instructions and use basic measuring tools. 
• Stand for extended periods. 
• Lift up to 50 lbs. 
• Perform frequent bending, reaching, and repetitive motions. 

• Generates packing lists and work orders.
• Inspects and packs company-made products.
• Performs accurate packaging for outbound shipment of goods to end users.
• Assist in preparation of export documents for third-party vendors.  Make necessary changes if specifications change.
• Performs picking and kitting of parts to support Production departments.
• Assists in daily cycle counts as needed
• Maintains a safe, clean, and well-organized warehouse.
• Operate the modular through storing parts
• Operate forklift as needed.

• High School Diploma or equivalent
• Minimum one year of experience operating a floor lift in a warehouse environment

• Basic knowledge of MS Office: Excel, Word, Outlook
• Excellent teamwork skills
• Detailed oriented with excellent attention to detail
• Ability to perform numerical calculations such as add, subtract, multiply, and divide
• Excellent organizational skills
• Ability to operate forklift and floor jack
• Ability to physically lift up to 45 lbs. occasionally and up to 20 lbs. frequently

• High school diploma or equivalent.
• Basic understanding of manufacturing processes and machinery operation.
• Ability to stand for extended periods and perform repetitive tasks.
• Strong attention to detail and commitment to quality.
• Ability to follow written and verbal instructions accurately.

• Previous experience in a manufacturing or production environment.
• Familiarity with safety standards such as OSHA regulations.
• Basic mechanical aptitude and troubleshooting skills.
• Experience using hand tools and production equipment.
• Ability to work effectively in a team-oriented environment.

• Operate and monitor production machinery and equipment to ensure smooth manufacturing processes.
• Assemble, inspect, and package products according to company specifications and quality standards.

• B Shift: Sunday–Wednesday (Week 1) / Sunday–Tuesday (Week 2)

• Work in strict accordance with the requirements according to the process SOP, using the skills acquired during training.
• Responsible for the sanitation and cleanliness of the work area and surrounding areas and the standard placement of items.
• Work seriously and responsibly, behave, and dress in compliance with company rules and regulations.
• Complete machine production capacity indicators as required and actively strive to ensure superior product quality and output.
• Before each shift, hand over the machine status, raw materials, work-in-progress, and tooling fixtures and provide machine status report.
• Check the product quality of the previous process and monitor current process.
• Complete the production registration for each time period, summarize any abnormal impacts and report to the team leader in a timely manner.
• Participate in company safety training, identify hazard sources, understand emergency procedures, and implement production safety during the manufacturing process.
• Complete any other tasks as assigned by management.

• High school diploma or equivalent required.
• Basic communication skills to collaborate effectively with team members.
• Ability to quickly learn job-specific skills, including basic office equipment and company software.
• Ability to read and understand basic numbers, measurements, and written instructions.
• Capable of multitasking in a fast-paced production environment.
• Strong teamwork mindset and reliability.
• Ability to work on a workshop/production floor environment.

• Lift, assemble, and move boxes and materials
• Perform physical warehouse work throughout the shift
• Stand, bend, lift, and move materials frequently
• Assist with warehouse and assembly duties

• Previous warehouse experience preferred
• Must be comfortable with frequent lifting and physical labor
• Dependable and able to work in a fast-paced environment
• Must be able to remain on your feet throughout the shift

• Levantar, ensamblar y mover cajas y materiales
• Realizar trabajo físico de almacén durante el turno
• Estar de pie, agacharse, levantar y mover materiales frecuentemente
• Apoyar en tareas generales de almacén y ensamble

• Experiencia previa en almacén preferida
• Cómodo realizando trabajo físico y levantando materiales frecuentemente
• Responsable y capaz de trabajar en un ambiente de ritmo rápido
• Capaz de permanecer de pie durante el turno

• Machine Operation: Set up, adjust, and operate either a Centerless Grinder or a Draw Machine according to production specifications.
• Monitoring & Quality Control: Closely monitor the machine during operation to ensure smooth production and prevent defects.
• Precision Measurement: Use Outer Diameter (OD) micrometers, calipers, and other gauges to verify that finished parts meet strict quality standards.
• Machine Setups: Perform regular changeovers, adjustments, and minor troubleshooting to keep machines running efficiently.
• Safety & Maintenance: Maintain a clean, safe work area and adhere to all company safety protocols.

• Mechanically Inclined: Strong natural mechanical aptitude and a knack for understanding how machinery works.
• Technical Experience: Prior experience using OD micrometers and other precision measuring tools is required.
• Setup Experience: Hands-on experience performing machine setups and mechanical adjustments.
• Attentive & Focused: Ability to monitor running machinery for long periods and catch discrepancies quickly.
• Reliable: Dependable punctuality and attendance are musts for our team.

• Competitive Starting Pay: $17.50 per hour.
• Comprehensive Training: Paid, hands-on training tailored to the specific machine you will operate.

• Follow detailed assembly instructions, processes and procedures
• Assemble enclosures and related parts in a timely manner
• Able to safely and correctly operate hand and power tools and machinery, including forklifts, semi-automated material handling equipment, and overhead cranes
• Participate in training and continuing education
• Performs other duties as assigned
• Work overtime as required

• High School Diploma or GED, required.
• Able to lift parts weighing up to 50 pounds (assistance when needed) and to work in bending, squatting and standing positions (including working off ladders) for long periods of time (in excess of one hour)

• Operar máquinas de coser industriales y realizar trabajos de costura Serger/Overlock y pespunte (top stitching).
• Guiar las piezas debajo de la aguja siguiendo bordes, costuras, guías de la máquina o marcas en el material.
• Cortar y organizar materiales de costura como ribetes, cintas, cordones, correas e hilo de acuerdo con las especificaciones de la orden de trabajo.
• Mantener organizados los materiales y recortar el exceso de hilo o material.
• Utilizar correctamente las herramientas, equipos y técnicas de fabricación.
• Utilizar y leer correctamente una cinta métrica.
• Manipular, posicionar y mover materiales durante el proceso de costura y otras operaciones de producción.
• Mantener atención a la calidad y los detalles del producto terminado.

• Mínimo 3 años de experiencia operando máquina de coser Serger/Overlock industrial — requerido.
• Experiencia en costura industrial o tapicería es preferida.
• Excelente atención al detalle.
• Habilidades mecánicas básicas.
• Debe saber leer y utilizar una cinta métrica.
• Capacidad para trabajar en un ambiente de producción y seguir instrucciones específicas.

• Guide parts under needle following edges seam, and guides on machine bed or markings on part Industrial sewing including top stitching.
• Cut and organize sewing supplies such as binding, webbing, cord, tape, or thread according to specific specifications or color of material as stated on work order.
• Maintain raw material, cut excess thread or material.
• Use proper equipment, tools, and fabrication techniques.
• Responsible for using a tape measure.
• Responsible for handling, positioning, and moving materials through the sewing and other manufacturing operations.

• Must have Serger sewing machine experience: Minimum 3 year (Required)
• Sewing/Upholstering experience preferred
• Attention to detail.
• Demonstrate mechanical skills.
• Must be able to read a tape measure.

• Operate grinding machines and hand tools to shape, smooth, and finish metal parts
• Remove excess material, burrs, and surface imperfections from metal components
• Read and interpret blueprints, drawings, and work orders
• Inspect finished products to ensure compliance with quality and dimensional standards
• Measure parts using calipers, micrometers, and other precision measuring tools
• Maintain and clean grinding equipment and work areas
• Follow all safety procedures and wear required personal protective equipment (PPE)
• Report equipment issues, defects, or maintenance needs to supervisors
• Assist with other fabrication and production duties as needed

• High school diploma or GED preferred
• 1–3 years of experience in metal grinding, fabrication, or manufacturing preferred
• Experience using angle grinders, bench grinders, belt sanders, and similar equipment
• Ability to read and understand blueprints, technical drawings, and specifications
• Knowledge of metal types and finishing techniques
• Strong attention to detail and commitment to quality
• Ability to work independently and as part of a team

• Ability to stand for extended periods
• Ability to lift and carry up to 50 lbs
• Ability to perform repetitive motions including grinding, bending, and lifting
• Comfortable working in a noisy and dusty manufacturing environment

• Manufacturing and fabrication shop setting
• Exposure to metal dust, sparks, and loud machinery
• Adherence to strict workplace safety standards is required

• Experience with polishing and finishing techniques
• Knowledge of welding and fabrication processes
• Forklift certification is a plus

• Move and organize materials, parts, and products throughout the facility
• Load and unload delivery trucks and trailers
• Stock shelves, racks, and bins in designated areas
• Pick, pull, and prepare orders for shipment accurately
• Package materials properly for shipping and receiving
• Perform basic quality checks on incoming and outgoing materials
• Maintain accurate inventory records and material movement logs
• Use RF scanners to track inventory and update system records
• Operate warehouse equipment such as forklifts, pallet jacks, and hand trucks
• Keep work areas clean, organized, and safe at all times
• Follow company safety procedures and warehouse guidelines

• Previous material handling / warehouse experience preferred
• Experience using RF scanners and inventory systems is a plus
• Ability to operate forklifts, pallet jacks, or other material handling equipment
• Ability to lift, move, and carry materials as needed
• Strong attention to detail and organizational skills
• Reliable attendance and ability to work in a fast-paced environment
• Must follow all safety policies and procedures

• Prepare vehicles for installation of accessories 
• Assist the installers by driving up the vehicles to the corresponding lane 
• Inspect vehicle to ensure it is properly prepared for the application of bed liner 
• Use shop equipment and tools safely

• Must willing to cross train in other as needed
• Must have a High School Diploma or GED
• Demonstrate mechanical skills 
• Must be able to work overtime/weekends 
• Must have a valid Driving License 
• Must be willing to work with Inclined weather conditions 
• Able to read, understand and comply with assigned area’s job instruction

• Run Parts: Quickly grab and deliver missing parts, tools, or supplies from the warehouse to the shop floor.
• Check Accuracy: Double-check part numbers and quantities to make sure the shop gets exactly what it needs.
• Solve Discrepancies: Communicate with warehouse and shop staff to track down missing items or fix inventory errors.
• Keep Organized: Help return unused or incorrect parts back to the warehouse.

• Stamina: Ability to stay on your feet, walk between buildings, and lift up to 50lbs.
• Detail-Oriented: Good at matching part numbers and labels accurately.
• Communication: Clear and friendly communication with both mechanics and warehouse staff.

• 1st: 6am to 2pm - $13.50
• 2nd: 2pm to 10pm - $14.00
• 3rd: 10pm to 6am - $14.25

• Assembling/Packing
• Sit/Stand combination, rotating through the assembly line for a change of pace throughout the day
• PACE is fast!

• A/C in each department
• FUN employee celebrations: BBQs, Halloween contests, donations, food drives, etc.

• Must have High School Diploma or Equivalent

• Medical gown and other required PPE

• Perform warehouse duties related to receiving, shipping, and storing raw materials and finished goods.
• Load, unload, move, and store materials using a sit-down forklift and other warehouse equipment.
• Transport materials between loading docks, trucks, production areas, and storage locations.
• Verify incoming and outgoing shipments for accuracy and inspect materials for quality.
• Review shipping and receiving documentation to ensure accuracy.
• Secure shipments using protective materials, strapping equipment, and proper packaging techniques.
• Stack and organize drums, pallets, skids, and other warehouse supplies in designated storage areas.
• Assist with cycle counts, inventory control, and physical inventories.
• Support production by ensuring materials are delivered accurately and on schedule.
• Follow all company policies, standard operating procedures, and OSHA safety regulations.
• Maintain a clean, organized, and safe work environment through daily housekeeping.
• Perform other warehouse-related duties as assigned.
• Maintain regular and reliable attendance.

• Minimum of one year of verified sit-down forklift (Powered Industrial Truck) experience preferred.
• Must successfully complete a practical forklift evaluation prior to hire.
• Clamp forklift experience is preferred.
• Experience using RF scanners is preferred.
• Ability to safely operate forklifts and other warehouse equipment.
• Strong attention to detail with the ability to accurately verify shipments and inventory.
• Basic math and written communication skills.
• Ability to work independently and in a fast-paced warehouse environment.
• Commitment to workplace safety and proper handling of equipment to prevent damage or loss.
• High school diploma or GED is not required.

• Responsibilities:
  • Ensure all domestic and international shipments comply with applicable trade regulations and company standards
  • Coordinate, prepare, pack, and execute shipments in accordance with requirements across multiple modes with carriers, freight forwarders, and brokers
  • Audit shipments to ensure alignment between physical goods, orders, and system records
  • Process domestic and international shipments through ERP and carrier systems (e.g., UPS, FedEx, DHL, IFS)
  • Classify products and ensure accurate declaration of origin, value, and shipment details
  • Prepare and review export documentation required for international shipments
  • Resolve shipping, customs, and documentation issues in a timely manner
  • Maintain accurate, audit-ready shipping records across systems
  • Monitor shipments and communicate status or exceptions to stakeholders
  • Identify and escalate compliance risks related to restricted shipments and trade controls
  • Process daily invoices.
  • Ensure strict adherence to ISO standard operating procedures and accuracy of all shipping documents.
  • Monitor the supply of packaging materials and requisition additional supplies as required.
  • Complete necessary management reports as required.
  • Help with or complete special projects at the discretion of the Supervisor/Manager.
  • Exercise practical confidentiality in discussions regarding company's financial data.
  • Ability to quickly adapt to ERP and shipping systems
    
    
• QUALIFICATIONS:
  • Education & Experience:
  • High School graduate required
  • Experience utilizing an MRP system, IFS is preferred.
  • Experience with a computerized dispatch shipping system
  • Experience with international shipping or trade compliance
  • Experience creating shipping documents/certificates in Word
  • Import /Export knowledge, NAFTA, USMCA, Korea-US FTA Certification

•  Knowledge & Skills: 
  • Demonstrated self-motivation and self-discipline traits.
  • Qualified forklift driver
  • PC computer familiarity – experience with Outlook, Word, Excel
  • Demonstrated effective communication skills written, oral, and inter-personal skills.
  • Demonstrated ability to multi-task, handling frequent interruptions and shifting priorities.
  • Positive and flexible attitude
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
  • Organized and efficient
  • Ability to communicate fluently in English

• We are preferred supplier of industrial condition monitoring systems to many of the world’s leading manufacturers and users of cooling towers, gas turbines, reciprocating compressors, and other rotating and reciprocating machinery. With headquarters in Houston, Texas, we operate in more than 40 countries via factory-direct sales and service professionals, along with a strategic network of instrumentation partners. We pioneered the concept of simple, affordable machinery protection with our seismic measurement technology. Initially focused on geophysical exploration, this technology also found abundant applications for vibration measurements on industrial machines and has been our focus for 50 years.

Warehouse Associate

• 1er Turno: $12/hora (6:00 AM – 2:30 PM)
• 2do Turno: $12/hora (2:00 PM – 10:30 PM)
• 3er Turno: $13/hora (10:00 PM – 6:30 AM)

• Recibir contenedores de plástico de una banda transportadora
• Recortar exceso de plástico cuando sea necesario
• Apilar cajas en tarimas (pallets)
• Realizar inspecciones básicas de calidad
• Mantener el área limpia y organizada

• No se requiere operar maquinaria
• No habrá interacción directa con máquinas

• Almacén sin aire acondicionado
• Debe estar dispuesto a trabajar en calor (hasta 90°F en verano)

• Jeans, leggings o camisetas (no shorts)
• Vestimenta modesta requerida
• Zapatos cerrados obligatorios (no se requiere PPE adicional)

• Capacidad para estar de pie por largos periodos
• Capacidad para levantar y apilar materiales
• Puntualidad y responsabilidad
• Disponibilidad para trabajar el turno asignado

• 1er Turno: $13/hora (6:00 AM – 2:30 PM)
• 2do Turno: $13/hora (2:00 PM – 10:30 PM)
• 3er Turno: $14/hora (10:00 PM – 6:30 AM)

• Recibir contenedores de plástico de una banda transportadora
• Recortar exceso de plástico cuando sea necesario
• Apilar cajas en tarimas (pallets)
• Realizar inspecciones básicas de calidad
• Mantener el área limpia y organizada

• No se requiere operar maquinaria
• No habrá interacción directa con máquinas

• 1st Shift: $13/hr (6:00 AM – 2:30 PM)
• 2nd Shift: $13/hr (2:00 PM – 10:30 PM)
• 3rd Shift: $14/hr (10:00 PM – 6:30 AM)

• Receive plastic containers from a conveyor belt
• Trim excess plastic when needed
• Stack boxes onto pallets
• Perform basic quality checks
• Keep work area clean and organized

• No machine operation required
• Employees will not interact directly with machinery

• Non-climate controlled warehouse
• Must be comfortable working in hot conditions (up to 120°F in summer)

• 1er Turno: $13/hora (6:00 AM – 2:30 PM)
• 2do Turno: $13/hora (2:00 PM – 10:30 PM)
• 3er Turno: $14/hora (10:00 PM – 6:30 AM)

• Recibir contenedores de plástico de una banda transportadora
• Recortar exceso de plástico cuando sea necesario
• Apilar cajas en tarimas (pallets)
• Realizar inspecciones básicas de calidad
• Mantener el área limpia y organizada

• No se requiere operar maquinaria
• No habrá interacción directa con máquinas

• Receive plastic containers from a conveyor belt
• Trim excess plastic when needed
• Stack boxes onto pallets
• Perform basic quality inspections
• Keep the work area clean and organized

• 1er Turno: $13/hora (6:00 AM – 2:30 PM)
• 2do Turno: $13/hora (2:00 PM – 10:30 PM)
• 3er Turno: $14/hora (10:00 PM – 6:30 AM)

• Recibir contenedores de plástico de una banda transportadora
• Recortar exceso de plástico cuando sea necesario
• Apilar cajas en tarimas (pallets)
• Realizar inspecciones básicas de calidad
• Mantener el área limpia y organizada

• Follow detailed assembly instructions, processes, and procedures
• Willing to cross train and work different departments and cells
• Assemble parts and components to required specifications and quality standards
• Perform machine setup and operate equipment as needed
• Conduct basic testing and inspection of assembled products
• Package finished products for shipment
• Follow all company Quality, Safety, and OSHA guidelines
• Participate in continuous improvement and safety programs (5S, Near Miss, etc.)
• Train team members on job functions and safety practices when needed
• Maintain a clean and organized work environment
• Perform other duties as assigned by supervisor

• Experience with assembly and testing processes
• Ability to read and interpret technical drawings and blueprints
• Strong attention to detail and problem-solving skills
• Good verbal and written communication skills
• Ability to work independently and in a team environment
• Basic knowledge of manufacturing equipment and processes

• High School Diploma or equivalent required

• Minimum of 2 years of manufacturing experience
• Electronic soldering experience 

• Receives, inspects, and stores incoming goods from vendors.
• Performs accurate packaging for outbound shipment of goods to end users.
• Generates packing lists and work orders.
• Performs picking and kitting of parts to support Production and Service departments.
• Performs daily cycle counts.
• Maintains a safe, clean, and well-organized warehouse.
• Operate forklift as needed.

• High School Diploma or equivalent
• Minimum one year of experience operating a floor lift in a warehouse environment

• Basic knowledge of MS Office: Excel, Word, Outlook
• Excellent teamwork skills
• Detailed oriented with excellent attention to detail
• Ability to perform numerical calculations such as add, subtract, multiply, and divide
• Excellent organizational skills
• Ability to operate forklift and floor jack
• Ability to physically lift up to 45 lbs. occasionally and up to 20 lbs. frequently

• A Shift: Sunday–Tuesday (Week 1) / Sunday–Wednesday (Week 2)
• C Shift: Wednesday–Saturday (Week 1) / Thursday–Saturday (Week 2)

• B Shift: Sunday–Wednesday (Week 1) / Sunday–Tuesday (Week 2)
• D Shift: Wednesday–Saturday (Week 1) / Thursday–Saturday (Week 2)

• Work in strict accordance with the requirements according to the process SOP, using the skills acquired during training.
• Responsible for the sanitation and cleanliness of the work area and surrounding areas and the standard placement of items.
• Work seriously and responsibly, behave, and dress in compliance with company rules and regulations.
• Complete machine production capacity indicators as required and actively strive to ensure superior product quality and output.
• Before each shift, hand over the machine status, raw materials, work-in-progress, and tooling fixtures and provide machine status report.
• Check the product quality of the previous process and monitor current process.
• Complete the production registration for each time period, summarize any abnormal impacts and report to the team leader in a timely manner.
• Participate in company safety training, identify hazard sources, understand emergency procedures, and implement production safety during the manufacturing process.
• Complete any other tasks as assigned by management.

• High school diploma or equivalent required.
• Basic communication skills to collaborate effectively with team members.
• Ability to quickly learn job-specific skills, including basic office equipment and company software.
• Ability to read and understand basic numbers, measurements, and written instructions.
• Capable of multitasking in a fast-paced production environment.
• Strong teamwork mindset and reliability.
• Ability to work on a workshop/production floor environment.

• Prepare vehicles for installation of accessories 
• Assist the installers by driving up the vehicles to the corresponding lane 
• Inspect vehicle to ensure it is properly prepared for the application of bed liner 
• Use shop equipment and tools safely

• Must willing to cross train in other as needed
• Must have a High School Diploma or GED
• Demonstrate mechanical skills 
• Must be able to work overtime/weekends 
• Must have a valid Driving License 
• Must be willing to work with Inclined weather conditions 
• Able to read, understand and comply with assigned area’s job instruction