• Prepare vehicles for installation of accessories 
• Assist the installers by driving up the vehicles to the corresponding lane 
• Inspect vehicle to ensure it is properly prepared for the application of bed liner 
• Use shop equipment and tools safely

• Must willing to cross train in other as needed
• Must have a High School Diploma or GED
• Demonstrate mechanical skills 
• Must be able to work overtime/weekends 
• Must have a valid Driving License 
• Must be willing to work with Inclined weather conditions 
• Able to read, understand and comply with assigned area’s job instruction

• A Shift: Sunday–Tuesday (Week 1) / Sunday–Wednesday (Week 2)

• Work in strict accordance with the requirements according to the process SOP, using the skills acquired during training.
• Responsible for the sanitation and cleanliness of the work area and surrounding areas and the standard placement of items.
• Work seriously and responsibly, behave, and dress in compliance with company rules and regulations.
• Complete machine production capacity indicators as required and actively strive to ensure superior product quality and output.
• Before each shift, hand over the machine status, raw materials, work-in-progress, and tooling fixtures and provide machine status report.
• Check the product quality of the previous process and monitor current process.
• Complete the production registration for each time period, summarize any abnormal impacts and report to the team leader in a timely manner.
• Participate in company safety training, identify hazard sources, understand emergency procedures, and implement production safety during the manufacturing process.
• Complete any other tasks as assigned by management.

• High school diploma or equivalent required.
• Basic communication skills to collaborate effectively with team members.
• Ability to quickly learn job-specific skills, including basic office equipment and company software.
• Ability to read and understand basic numbers, measurements, and written instructions.
• Capable of multitasking in a fast-paced production environment.
• Strong teamwork mindset and reliability.
• Ability to work on a workshop/production floor environment.

• Order Puller-Pick items for sale orders from the warehouse using RF scanner
• Receiving-Unload and put away items on shelf
• Shipping- UPS, FedEx and LTL shipment.
• Help keep the warehouse clean and organized.
• Must be able to lift average of 10-30 pounds

• Will split their time in the non climate-controlled warehouse and the other portion inside - big plus!
• No overtime expected.
• No PPE needed - tennis shoes OK
• Nice clean warehouse!

• Assist maintenance technician in routine preventive maintenance inspections and service on machines.
• Clean interior of the building, as well as machinery and equipment, and exterior of the building.
• Complete administrative duties, such as filling out forms and reporting maintenance statuses to supervisor.
• Comply with all safety and health regulations.
• Keep inventory of maintenance and cleaning supplies and equipment, and report needs to supervisor.
• Assist with emergency calls for maintenance and repairs.
• Follow lockout/tagout procedures and all safety rules 100% of the time.
• Diagnose and troubleshoot issues.
• Follows and maintains 5 S practices.
• Performs other duties as assigned.

• Basic knowledge of HVAC, plumbing, electrical, carpentry, and mechanical systems (including relevant equipment and tools) is a plus.
• Basic tow motor, power tools, and crane knowledge preferred.
• Ability to stand or walk for extended periods of time; ability to bend, kneel, stoop, and lift or move heavy equipment.
• Ability to read and interpret safety rules, operating and maintenance instructions, and other manuals and documents.
• Ability to work in a team and follow instructions from supervisors.
• May be required to work outside of normal work hours.

• High school diploma or equivalent required.
• 2+ years of related experience preferred.
• On-the-job training offered.

• Prolonged periods standing and walking.
• Must be physically able to climb ladders, bend, or crawl into awkward spaces.
• Must be able to lift up to 50 pounds at a time.

• A Shift: Sunday–Tuesday (Week 1) / Sunday–Wednesday (Week 2)

• Receive and inspect incoming shipments
• Store materials and products in the correct locations.
• Pick and pack orders for production or shipment.
• Load and unload trucks safely.
• Keep the warehouse clean, organized, and free of hazards.
• Update inventory records and complete basic paperwork.
• Follow safety rules and report any issues to a supervisor.
• Use warehouse equipment like pallet jacks or forklifts (training provided if needed).
• Complete other duties as assigned by management.

• High school diploma or equivalent.
• Previous warehouse experience is helpful but not required.
• Able to lift and move items (up to 50 lbs) safely.
• Comfortable standing, walking, and bending for long periods.
• Basic reading and math skills.
• Good teamwork and communication skills.
• Willing to follow instructions and learn new tasks.
• Forklift certification is a plus, but not required

• Steel-toe shoes required
• Non-Climate Controlled 
• Must be comfortable in a busy and fast-paced environment
• Must be able to work OT
• Must be able to lift up to 50 pounds regularly

• A Shift: Sunday–Tuesday (Week 1) / Sunday–Wednesday (Week 2)

• Receive and inspect incoming shipments.
• Store materials and products in the correct locations.
• Pick and pack orders for production or shipment.
• Load and unload trucks safely.
• Keep the warehouse clean, organized, and free of hazards.
• Update inventory records and complete basic paperwork.
• Follow safety rules and report any issues to a supervisor.
• Use warehouse equipment like pallet jacks or forklifts (training provided if needed).
• Complete other duties as assigned by management.

• High school diploma or equivalent.
• Previous warehouse experience is helpful but not required.
• Able to lift and move items (up to 50 lbs) safely.
• Comfortable standing, walking, and bending for long periods.
• Basic reading and math skills.
• Good teamwork and communication skills.
• Willing to follow instructions and learn new tasks.
• Forklift certification is required

• Work takes place in a warehouse or storage area within a manufacturing facility.
• May involve exposure to noise, moving equipment, and varying temperatures.

• Perform quality testing and inspections (hardness, visual, and system-based testing)
• Review, interpret, and summarize test data; generate reports for customers (System 22, PMI, etc.)
• Ensure all materials meet required specifications and report any discrepancies
• Maintain accurate documentation to support testing and quality procedures
• Calibrate and maintain testing equipment on a regular schedule
• Receive incoming shipments, inspect for damages, and organize inventory
• Track and record invoices and product movement within the warehouse
• Follow all safety guidelines and company procedures at all times

• Previous experience in quality control, inspection, or warehouse receiving
• Familiarity with testing equipment such as optical comparator, XM/IM systems, or hardness testers preferred
• Basic understanding of ISO standards and quality procedures is a plus
• Strong attention to detail and ability to work with technical data
• Ability to stay organized and manage multiple tasks in a fast-paced environment

• Must have strong  HAAS lathe Y axis  experience or Haas Mill Machinist 
• Will be machining “small” parts.
• Must be able to setup and run independently.
• Haas/ Fanuc Controls
• Multi-axis machining
• Must have a minimum of 5 years’ of Haas experience.

• Prepare vehicles for installation of accessories 
• Assist the installers by driving up the vehicles to the corresponding lane 
• Inspect vehicle to ensure it is properly prepared for the application of bed liner 
• Use shop equipment and tools safely

• Must willing to cross train in other as needed
• Must have a High School Diploma or GED
• Demonstrate mechanical skills 
• Must be able to work overtime/weekends 
• Must have a valid Driving License 
• Must be willing to work with Inclined weather conditions 
• Able to read, understand and comply with assigned area’s job instruction

• A Shift: Sunday–Tuesday (Week 1) / Sunday–Wednesday (Week 2)
• C Shift: Wednesday–Saturday (Week 1) / Thursday–Saturday (Week 2)

• B Shift: Sunday–Wednesday (Week 1) / Sunday–Tuesday (Week 2)
• D Shift: Wednesday–Saturday (Week 1) / Thursday–Saturday (Week 2)

• Work in strict accordance with the requirements according to the process SOP, using the skills acquired during training.
• Responsible for the sanitation and cleanliness of the work area and surrounding areas and the standard placement of items.
• Work seriously and responsibly, behave, and dress in compliance with company rules and regulations.
• Complete machine production capacity indicators as required and actively strive to ensure superior product quality and output.
• Before each shift, hand over the machine status, raw materials, work-in-progress, and tooling fixtures and provide machine status report.
• Check the product quality of the previous process and monitor current process.
• Complete the production registration for each time period, summarize any abnormal impacts and report to the team leader in a timely manner.
• Participate in company safety training, identify hazard sources, understand emergency procedures, and implement production safety during the manufacturing process.
• Complete any other tasks as assigned by management.

• High school diploma or equivalent required.
• Basic communication skills to collaborate effectively with team members.
• Ability to quickly learn job-specific skills, including basic office equipment and company software.
• Ability to read and understand basic numbers, measurements, and written instructions.
• Capable of multitasking in a fast-paced production environment.
• Strong teamwork mindset and reliability.
• Ability to work on a workshop/production floor environment.

• Prepare and support accurate financial statements (balance sheet, income statement, cash flow) in accordance with GAAP
• Ensure compliance with all applicable federal, state, and local tax regulations
• Prepare and file company tax returns (sales tax, use tax, and other applicable filings)
• Support and coordinate internal and external audits, including gathering required documentation and responding to audit requests
• Maintain and reconcile general ledger accounts and supporting schedules
• Assist with month-end and year-end close processes
• Analyze financial data and identify discrepancies or trends
• Support budgeting and forecasting activities as needed
• Maintain and strengthen internal controls to ensure financial accuracy and compliance
• Oversee ERP system usage (NetSuite or similar), ensuring data accuracy and proper financial workflows
• Manage relationships with ERP and financial system vendors, including issue resolution and coordination of system updates or improvements
• Collaborate cross-functionally with operations, logistics, and leadership to support accurate financial reporting
  Identify opportunities to improve accounting processes and efficiencies

• Bachelor’s degree in Accounting or Finance required
• 3–5+ years of accounting experience
• Experience with tax compliance and filings required
• Experience supporting or participating in audits
• Strong experience with ERP systems (NetSuite preferred)
• Manufacturing experience highly preferred

• CPA or progress toward CPA preferred
• Experience with multi-state tax filings
• Experience with manufacturing tax credits is a plus
  

• Strong understanding of accounting principles and practices
• Knowledge of tax compliance and regulatory requirements
• Analytical and problem-solving skills
• Strong attention to detail and accuracy
• Ability to manage multiple priorities in a fast-paced environment
• Effective communication and cross-functional collaboration skills
• Proficiency in Microsoft Excel

• Receive, inspect, and store incoming materials and products
• Move materials to production lines and workstations as needed
• Load and unload trucks using forklifts or other material handling equipment
• Maintain accurate inventory and report discrepancies
• Organize warehouse and production areas to ensure efficient workflow
• Assist with packaging, labeling, and preparing shipments
• Follow safety procedures and company policies
• Maintain cleanliness and organization of work areas
• Support production team as needed

• Ability to lift up to 50 lbs
• Forklift experience preferred (or willing to be trained)
• Ability to work in a fast-paced environment
• Strong attention to detail
• Good communication and teamwork skills
• Basic understanding of warehouse operations
• Reliable attendance and punctuality
• Ability to follow instructions and safety procedures

• Previous warehouse or manufacturing experience
• Experience with inventory systems
• Experience working in a production environment

• Warehouse and manufacturing environment
• Standing, walking, lifting, and bending required
• Use of forklifts and material handling equipment

• Day – 5am – 1:30pm
• Night – 4pm – 12:30am
• Some weekends based on campus projects

• Career Growth: Advance your career with opportunities for leadership and personal development.
• Culture of Excellence: Be part of a supportive team that values your input and encourages innovation.
• Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs.

• Lead advanced maintenance and repair of HVAC, electrical, plumbing, and mechanical systems, ensuring maximum uptime and efficiency across facilities
• Design, implement, and oversee comprehensive preventative maintenance programs to extend equipment life, minimize unplanned downtime, and optimize resource utilization
• Serve as subject matter expert (SME) for HVAC systems, including troubleshooting complex issues, reviewing load calculations, and ensuring compliance with energy and environmental standards
• Provide technical leadership on electrical systems, including switchgear, distribution panels, backup power systems, and compliance with NFPA/NEC codes
• Develop and track maintenance KPIs (e.g., equipment reliability, MTBF, energy efficiency) and present findings to management to support data-driven decisions
• Conduct root-cause analysis of recurring equipment failures, recommend corrective actions, and implement long-term solutions
• Drive process improvement initiatives to streamline maintenance workflows, reduce costs, improve system reliability, and align practices with industry best standards
• Ensure strict compliance with safety policies, NFPA codes, OSHA requirements, and all environmental regulations during maintenance and project execution
• Mentor and provide technical guidance to junior engineers and maintenance staff, building cross-functional expertise and operational depth

• Associate's Degree from an accredited four-year college or university Req
• 4-6 years related experience and/or training; or equivalent combination of education and experience Required
• DL NUMBER - Driver License, Valid and in State Upon Hire Required
• State Licensed Electrician A State of Texas Apprentice Maintenance Electrician License or a City of Houston Third Grade Stationary Engineer license is preferred. Preferred
• HVAC Awareness
• Reliability Engineering Awareness-Developing Required
• Predictive Maintenance Awareness-Developing Required
• Computerized Maintenance Management Systems Computerized maintenance management system is a software package that maintains a computer database of information about an organization's maintenance operations. Awareness-Developing Required
• Preventive Maintenance Awareness-Developing Required
• Plumbing Awareness-Developing Required
• Mechanical Engineering Awareness-Developing Required
• Electrical Systems Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. Awareness-Developing Required
• Equipment Repair Awareness

• 10% Minimal travel is required for this position (up to 10% of the time and on a domestic basis).

• Oversee the preparation of all necessary financial statements, and ensure that all financial reporting is accurate and timely
• Responsible for ensuring compliance with state, federal, and local tax laws
• Monitor the accuracy of financial data and ensure that all financial transactions are properly recorded
• Analyze financial data for patterns, trends, and anomalies, and recommend corrective action as necessary
• Develop and implement financial policies and procedures to ensure compliance with all applicable laws and regulations
• Prepare and review monthly, quarterly, and annual financial reports
• Provide financial guidance and support to department heads, and ensure that all financial decisions are in alignment with the organization’s strategic goals
• Supervise and mentor accounting staff
• Knowledge of QuickBooks Online

• Welcome potential home buyers into the model.
• Complete Info on Name, Address, Contact Info
• Find Out When they are Ready to Build & Do They Own Their Own Lot
• Answer Phones/Respond to Voice Mails & Emails
• Assist Personnel As Needed
• Demonstrate exceptional customer service to potential buyers and sales representatives.

• One year of Customer Service experience. 
• Professional and self-motivated.

• Experience with Amphenol cables, in our assembly process the team will be required to assemble cables that will connect with gas turbines and other auxiliary equipment. Assist with the pin insertion that is needed mate cables together.
• Experience with wire/cable terminations with control panels and MCC/IO cabinets. This requires a high degree of attention to detail because wires must be stripped, wires must ferruled, and wires must be labeled to ensure overall job accuracy and accomplishment. Lastly, cables and wires must be routed in the panel/cabinet correctly.
• Experience with wire preparation and labeling, we would like the candidates to be proficient in wire preparation. Wire preparation, consists of inspecting the wire, stripping wire to the correct length, and having the correct ferrule installed.

• Must have strong  HAAS mill experience
• Will be machining “small” parts.
• Must be able to setup and run independently.
• Haas/ Fanuc Controls
• Multi-axis machining
• Must have a minimum of 2 years’ of Haas experience.

• A Shift: Monday – Wednesday, alternate Sunday, 7:00am – 7:00pm
• Overnight A Shift: Monday – Wednesday, alternate Sunday, 7:00pm – 7:00am
• Overnight B Shift: Thursday – Saturday, alternate Sunday, 7:00pm – 7:00am

• High School Diploma or GED
• Must be able to work with small parts

• Good manual dexterity with the ability to stand or sit for extended periods of time in a repetitive manufacturing environment.
• Good verbal communication skills in English.
• Must be comfortable to work with wearing cleanroom garments and no makeup.

• Brand new state-of-the-art facility Fitness center, lounge, and other activities on-site
• Performance-based incentives - Annual cash bonus
• Comprehensive Medical Insurance - Offers multiple health insurance plans
• Dental/Vision paid by company
• 401K Retirement Plans with 4% Company Match
• Generous PTO in your First Year

• Assist the Accounting Manager with filing and organizing customer invoices
• Ensure all invoiced transactions are accurately documented and properly stored
• Maintain both digital and physical filing systems for accounting records
• Verify invoice details for completeness and accuracy before filing
• Support basic data entry tasks related to invoicing and accounting records
• Retrieve and provide invoice documentation as requested by internal teams
• Maintain confidentiality of financial information at all times
• Perform other administrative and accounting support tasks as needed

• High school diploma or equivalent required; associate degree in accounting or related field preferred
• 1+ year of experience in an administrative or accounting support role preferred
• Strong attention to detail and organizational skills
• Basic understanding of accounting principles is a plus
• Proficiency in Microsoft Office (Excel, Word, Outlook)
• Ability to manage multiple tasks and meet deadlines
• Strong communication and teamwork skills

• Office-based role with routine interaction with the accounting team
• May involve handling both paper and electronic records

• Temporary assignment (duration to be determined based on business needs)

• Operates fabricating machines, such as cut off saws, shears, rolls, brakes, presses, forming machines, spinning machines, and punch, that cut, shape, and bend metal plates, sheets, tubes, and structures. 
• Reads job specifications to determine machine adjustments and material requirements. 
• Positions stops or guides to specified length as indicated by scale, rule, or template. .

• Serves as lead design resource in the Product Group and as a mentor to less experienced design personnel.
• Works with Engineering to develop 2D and 3D conceptual drawings for sustaining engineering efforts and/or new product development.
• Works with Engineering to suggest design alternatives for conceptual designs.
• Develops detailed 2D and 3D fabrication drawings for sustaining engineering efforts and/or new product development.
• Participates in formal design reviews to evaluate conceptual and detailed designs.
• Performs final drafting checks to minimize drawing errors and omissions.
• Works with Engineering and Operations to resolve design-related issues detected during product realization efforts.
• Assists Engineering to develop and maintain 2D and 3D drafting standards that meet or exceed Customer expectations.
• Assists Engineering to develop and maintain an organized storage system to catalog and store 2D and 3D drawings.
• Other duties as assigned.

• Ensamblar materiales en la línea de producción
• Cortar y dar forma a piezas con herramientas
• Configurar y operar maquinaria (manual y computarizada)
• Realizar inspecciones de calidad
• Apoyar en manejo de materiales, ensamblaje e instalación
• Seguir normas de seguridad y usar el equipo correctamente

• Persona responsable y con ganas de trabajar
• Capacidad para trabajar en un ambiente rápido
• Habilidad para usar herramientas básicas y seguir instrucciones

• Assemble materials on the production line
• Cut and shape parts using hand tools and equipment
• Set up and operate machines (manual and computer-controlled)
• Perform quality checks to ensure products meet standards
• Assist with material handling, assembly, and installation
• Follow safety guidelines and use proper tools and techniques

• Reliable and ready to work
• Comfortable working in a fast-paced environment
• Able to use basic tools and follow instructions

Job Responsibilities

Daily Tasks

• Operate and monitor production machines to ensure continuous and stable operation.
• Perform equipment calibration, setup, and verification per established procedures.
• Troubleshoot and resolve minor mechanical, electrical, and software-related issues.
• Perform basic repairs and adjustments to maintain uptime and prevent quality deviations.
• Conduct preliminary root cause analysis on equipment and device failures.
• Support engineers in identifying and documenting failure modes and contributing factors.
• Rework failed devices and components following defined rework or repair procedures.
• Follow established work instructions, operating procedures, and safety protocols.
• Maintain detailed logs of machine performance, failure trends, and maintenance actions.
• Support the engineering team during process development and qualification runs.
• Perform data collection and assist in generating reports or documentation as needed.
• Escalate recurring or critical issues to the Equipment Engineer or Section Supervisor.
• Maintain a clean and organized work environment in compliance with cleanroom standards.
• Provide backup support for operators when necessary.
• Perform other duties as assigned by the Production Manager, Section Manager, or Production Supervisor.

• Supervisory Responsibilities
  • The Production Technician may assist the Production Supervisor in overseeing operators in their absence. The technician will act as a mentor for operators, providing guidance on machine operation, troubleshooting, and proper handling of devices or tools.

Qualifications

• Required Education:  Vocational Course Graduate or Associate Degree in Electronics, Mechatronics, or related field.
• Preferred Education: Vocational Course Graduate or Associate’s Degree
• Required Experience: 1 year of experience in equipment operation, troubleshooting, or device assembly in a manufacturing environment.
• Preferred Experience:
  • 3 years of experience as a Production or Equipment Technician in semiconductor, photonics, or electronics manufacturing.
  • Experience with automated machinery, sensors, pneumatic systems, or robotic handling equipment.
  • Experience with microscopes, soldering, hand tools, and measurement instruments.
  • Familiarity with failure mode analysis, rework processes, or quality control methods.
• Software/Hardware Knowledge:
  • Basic to intermediate computer literacy (Excel, Access, or equivalent data entry tools).
  • Understanding of basic programming, PLC, or CAD software is a plus.

• Strong mechanical and electrical troubleshooting skills.
• Good hand-eye coordination and ability to work under a microscope.
• Excellent attention to detail and ability to follow complex procedures accurately.
• Strong communication skills for cross-department collaboration.
• Ability to multitask and prioritize under limited supervision.
• Comfortable working in repetitive, precision-based production environments

• Detail-oriented and proactive in identifying potential issues.
• Adaptable to shifting priorities in a fast-paced manufacturing setting.
• Team-oriented and committed to continuous improvement.
• Dedicated to maintaining safety, quality, and compliance standards.

• Must be comfortable working in a cleanroom environment and wearing required garments.
• No make-up or perfume is permitted in the cleanroom area

•  Manufacturing testing of Process and Natural Gas. Ability to troubleshoot system issues of both an electrical and analytical nature. Responsible for testing hardware, understanding GC applications and the use of chromatography software.
• Tests and evaluates analyzer applications by reviewing specifications for applications for accuracy, blending gases, repairing electronic and mechanical problems, programming and testing the controller attached to the system, and checking for valve problems.
• Tests analyzers in the environmental chamber, modifies test fixtures to interface with the chamber, installs analyzers in the chamber, runs computer programs to test the analyzers, and furnishes data to Quality.
• Ensures all documentation is assembled for the customers print package and is accurate, notifies of changes to specifications, provides input to shipping schedules, and logs problems and failures and reports to Quality.
• Duties may be changed at any time and other duties may be assigned.

• High School graduate or equivalent required (GED)
•  Process GC manufacturing test experience preferred. Strong analytical, electronics, and mechanical background. Background in chemistry in reference to analytical applications.
•  Technical degree preferred and/or strong experience in testing and understanding Process Gas GC applications.
• Must have strong interpersonal and communication skills.
•  Exposed to fumes, gases, and chemicals.

• Operate and monitor CNC lathes to machine precision parts according to work orders and blueprints
• Load raw materials, run production parts, and unload finished components
• Read and interpret blueprints, work instructions, and setup sheets to determine part requirements
• Load CNC programs and set tools, offsets, speeds, and feeds as directed
• Select, measure, install, and secure tools and attachments with minimal supervision
• Independently verify dimensions using calipers, micrometers, gauges, and other precision instruments
• Edit and adjust CNC programs or controls to correct minor errors or optimize performance
• Maintain machines, replace worn tools, and perform basic preventive maintenance
• Complete required production documentation and in-process inspection checks
• Maintain a clean, organized work area in compliance with safety and PPE requirements
• Communicate promptly with supervisors regarding machine or quality issues
• Assist with material handling, tooling changes, and other production support tasks as needed

• High school diploma or equivalent
• 5+ years of CNC lathe machining experience, preferably working with plastics
• Proficiency in reading and interpreting blueprints, GD&T, and 3D CAD models
• Skilled in the use of calipers, micrometers, and precision gauges
• Experience with FANUC-controlled CNC machines and G-code programming
• Hands-on machining and setup experience, including prove-outs and troubleshooting
• Demonstrated ability to hold tight tolerances and meet SAE aerospace standards
• Experience machining materials such as PEEK and Teflon
• Additional machining experience with:
  • Stainless steels (300 Series, Nitronic 60)
  • PH stainless steels (15-5, 17-4)
  • Aluminum bronze
  • MP35N and Inconel

• Perform in-process inspections at various production stages.
• Check raw materials, semi-finished, and finished products for quality compliance.
• Use measuring tools (calipers, micrometers, gauges, etc.) and related lab equipment (thermo chamber, convection oven, tensile testing machine, etc.) to verify specifications.
• Record inspection results and maintain quality documentation.
• Identify defects, deviations, or non-conforming products.
• Inform production supervisors of quality issues.
• Ensure adherence to SOPs (Standard Operating Procedures).
• Collaborate with Sales, QA and Customer Support functions on all phases of customer feedback and product issue resolution.
• Monitor production processes to prevent defects.
• Assist in implementing corrective and preventive actions.
• Maintain cleanliness and follow safety guidelines.

• High school diploma or equivalent experience (Quality/Engineering preferred).
• 2-3 years experience in QA/QC/IPQC position in manufacturing plants (electronics, consumer electronics, food processing, pharmaceutical, etc. fields) preferred.
• Basic knowledge of quality control principles.
• Ability to read drawings, specifications, and inspection reports.
• Familiarity with measuring instruments.
• Attention to detail and good observation skills.
• Basic computer skills for documentation.
• Strong communication, comprehension and interpersonal skills.
• Ability to work independently and as part of a team.
• Ability to work in a fast-paced manufacturing environment.
• May involve standing for long hours
• May require shift work

• North Houston
• Northwest Houston
• South Houston

• Proven sales experience with the nurturing and ability to turning new client relationships into valued partnerships
• Ability to establish professional relationships with clients through phone calls/emails, meetings and on-site visits
• Experience prospecting and building a network for new business opportunities and referrals

• 1+ years in an Outside Sales role
• Previous experience in the Staffing industry, preferred
• Bilingual – English/Spanish, preferred but not required
• Excellent communication, organizational and time-management skills
• High Energy with a ‘motivated, can-do’ attitude
• Ability to build strong relationships
• Ability to set goals, results-driven and manage priorities

• Base Salary with a competitive commission structure 
• Health, Dental and Vision Insurance
• Long and Short-Term Disability
• Life Insurance
• Vacation and Holiday Pay
• Training and Advancement opportunities  
• Team Building Events
• Mileage Allowance
• Diversity and inclusion focus and programs
• Focused communication and training support

• Perform daily inventory checks of PPE supplies (gloves, masks, lab coats, shoe covers, etc.)
• Restock PPE cabinets and gowning areas as needed
• Track inventory, lot numbers, and expiration dates using FIFO methods
• Support weekly gowning distribution for employees
• Maintain clean, organized, and audit-ready gowning areas
• Scan, sort, and prepare used garments for laundry services
• Receive and inspect incoming cleanroom materials
• Assist with labeling, storage, and coordination of supplies

• High school diploma or equivalent required
• 1–2 years of warehouse, manufacturing, or inventory experience preferred
• Strong attention to detail and organization skills
• Ability to lift 15–30 lbs
• Basic computer skills (Excel, scanners, inventory systems)
• Experience in cleanroom environments is a plus 

• Develop, optimize, and maintain injection molding processes for precision components 
• Support tooling design, modifications, and process improvements to enhance efficiency and reduce costs 
• Troubleshoot molding and production issues, implementing effective corrective actions 
• Ensure compliance with quality standards, regulatory requirements, and internal procedures 
• Lead and support new product development and process validation efforts 
• Collaborate with engineering, production, and quality teams to meet project timelines and goals 
• Drive continuous improvement initiatives related to process capability, yield, and cycle time 

• Bachelor’s degree in Engineering (Plastics or Mechanical preferred), or equivalent work experience
• Minimum of 5 years of engineering experience in a manufacturing environment 
• At least 5 years of experience in injection molding, mold design, and process engineering 
• Experience with connector design and cable assembly is preferred 
• Strong knowledge of cost-effective tool modification techniques 
• Understanding of fabrication processes, machining, grinding, wire EDM, and molding tolerances 
• Familiarity with electrical and mechanical testing methods and regulatory standards 
• Proficiency in Microsoft Office, Google Suite, SolidWorks, and database navigation (e.g., Access) 
• Excellent written and verbal communication skills 

• Google Enterprise 
• ADP

• Create efficient and accurate CNC Lathe programs using Mastercam based on blueprints, CAD models, and job specifications.
• Set up and operate CNC Lathe machines, ensuring proper material loading and machine configuration.
• Configure tool registers and apply offsets/compensations according to job requirements.
• Interpret technical drawings and blueprints to guide machining operations.
• Perform detailed inspections using micrometers, calipers, gauges, and other precision measuring instruments.
• Verify machine settings and ensure parts meet quality and tolerance specifications.
• Design and build custom fixtures to support efficient and precise machining.
• Select appropriate cutting tools, work holding, fixtures, and machining parameters for production needs.
• Conduct routine maintenance and ensure machines remain calibrated and safe to operate.
• Troubleshoot and resolve mechanical or machining process issues.
• Follow all safety procedures and guidelines when operating machinery and handling materials.
• Collaborate with cross-functional teams to meet production deadlines and quality standards.
• Maintain a clean, organized, and efficient work area.
• Perform additional duties as needed to support production and business needs.

• High school diploma or equivalent required; technical or vocational training in machining preferred.
• Minimum 5 years of Mastercam programming experience for CNC Lathes.
• Minimum 5 years of hands-on CNC Lathe setup and operation experience.
• Experience machining metals including:
  • 300 Series Stainless Steel
  • Nitronic 6
  • PH Stainless Steels (15-5, 17-4)
  • Aluminum
  • Bronze
  • MP35N
  • Inconel

• Strong understanding of CNC G-code and M-code programming.
• Ability to read and interpret blueprints, technical drawings, and machining specifications.
• Knowledge of metal machining properties, tooling, and cutting parameters.
• Proficiency with precision measuring tools including micrometers, calipers, indicators, and gauges.
• Experience working with tight tolerances and surface finish requirements.
• Ability to work independently, troubleshoot issues, and maintain production workflow.
• Strong shop math and mechanical aptitude related to CNC lathe operations.
• Excellent attention to detail, organization, and time management skills.

• Completes tasks as assigned by supervisor or lead welder in a timely manner.
• Advanced understanding of fabrication requirements and company expectations related to complete package assembly and explaining to others effectively.
• Follow instructions from supervisors for project changes or job duties.
• Fabricate or prepare parts as needed by grinding, cutting, drilling, tacking, or welding.
• Fit-up package parts and weld out in standard time frame.
• Produce clean welds with minimal grinding or buffing.
• Keep work area clean and put tools away when finished with them.
• Train new employees in company product assembly and expectations.
• Takes responsibility for work area and mentor new employees.
• Accurately fills out timecards and jobs assignments.
• Performs other duties as assigned.

• Must have passed 6G MIG welding test.
• Work towards passing 6G TIG welding test.
• Must demonstrate advanced level fit-up ability as evaluated by supervisor or QC.
• Must understand shop book drawings at an advanced level and be able to demonstrate to others effectively.
• No weld leaks in 180 consecutive days.
• Advanced understanding of welding machine settings and match to WPS.
• Welds must be visually acceptable and clean prior to any grinding or buffing.
• Advanced understanding of mathematics as related to welding assignments.
• Using and reading levels, tape measures and other measurement devices accurately.

• Completion of at least 1-year of a formal apprenticeship or training program or,
• Completion of at least 2-year welding program from accredited entity.
• At least 4 years’ experience in a related field with no more than 1 year absence from welding activities.

• Must have enough manual dexterity and stability as required for precision work.
• Must be able to see details at close range.
• Must be able to lift at least 15 pounds at times.
• Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.

• High School Diploma or GED
• Must be able to work with small parts

• Good manual dexterity with the ability to stand or sit for extended periods of time in a repetitive manufacturing environment.
• Good verbal communication skills in English.
• Must be comfortable to work with wearing cleanroom garments and no makeup.

• Brand new state-of-the-art facility Fitness center, lounge, and other activities on-site
• Performance-based incentives - Annual cash bonus
• Comprehensive Medical Insurance - Offers multiple health insurance plans
• Dental/Vision paid by company
• 401K Retirement Plans with 4% Company Match
• Generous PTO in your First Year

• Troubleshoot and repair electrical systems, panels, lighting, outlets, breakers, and equipment
• Perform daily inspections of electrical rooms, panels, and backup power systems
• Maintain and repair facility lighting systems
• Complete work orders per SOP and ensure NEC and local code compliance
• Identify and correct hazardous conditions
• Coordinate with and escort vendors and contractors
• Assist with general facility maintenance (HVAC, plumbing, building repairs)

• High School Diploma or GED
• 3+ years of commercial or industrial electrical experience
• Journeyman Electrician license preferred
• Experience with conduit bending, motors, panels, and lighting systems
• Ability to read electrical diagrams and blueprints
• Able to lift up to 75 lbs and work in tight spaces or varied conditions

• Conducts inspection, testing, and/or screening for defects in components.
• Uses of microscopes for further inspection and hand picking of small components using tweezers.
• Documents inspection results by completing reports and logs into quality database.
• Keeps measurement equipment operating by following SOPs (standard operating procedures).

• Minimum Education Requirements: High School Diploma or Equivalent
• Software/ Hardware Knowledge: Basic computer skills for daily work
• Know how to use Microsoft word and Excel software for document and data entry
• Skills/ Abilities: Ability to use microscope; Steady hands; Need to be able to handle very small components
• Personal Characteristics: Willing and eager to learn, cooperate and follow instructions, pays careful attention to detail
• Understand and communicate in English

• Communicate delivery status, schedule changes and returns by talking with customers by phone or in person or through fax or e-mail confirmations.
• Communicate the status of quotes, questions and orders pro-actively by promptly forwarding information to the sales representative.
• Process assigned sales orders by reviewing input from Customer Service staff and entering into a computer database system.
• Serve as internal liaison for all departments on assigned accounts by providing effective and efficient lines of communication.
• Maintain appropriate inventory levels as required or specified by the account.
• Prepare estimate requests, correspondence or quotes for customers by following established procedures and formats.
• Produce and distribute required account-related reports.
• Assist the Sales Team in scheduling meetings with internal and external customers.
• Assist Accounting by keeping assigned customer receivables current by researching invoices as needed and communicating requests and actions to customers.
• Assist Sales Team in developing and setting up new customer products as necessary.
• Create and maintain internal customer files in good order.

• Operate and monitor production machines to ensure continuous and stable operation.
• Perform equipment calibration, setup, and verification per established procedures.
• Troubleshoot and resolve minor mechanical, electrical, and software-related issues.
• Perform basic repairs and adjustments to maintain uptime and prevent quality deviations.
• Conduct preliminary root cause analysis on equipment and device failures.
• Support engineers in identifying and documenting failure modes and contributing factors.
• Rework failed devices and components following defined rework or repair procedures.
• Follow established work instructions, operating procedures, and safety protocols.
• Maintain detailed logs of machine performance, failure trends, and maintenance actions.
• Support the engineering team during process development and qualification runs.
• Perform data collection and assist in generating reports or documentation as needed.
• Escalate recurring or critical issues to the Equipment Engineer or Section Supervisor.
• Maintain a clean and organized work environment in compliance with cleanroom standards.
• Provide backup support for operators when necessary.
• Perform other duties as assigned by the Production Manager, Section Manager, or Production Supervisor.

• Supervisory Responsibilities
  • The Production Technician may assist the Production Supervisor in overseeing operators in their absence. The technician will act as a mentor for operators, providing guidance on machine operation, troubleshooting, and proper handling of devices or tools.

• Required Education:  Vocational Course Graduate or Associate Degree in Electronics, Mechatronics, or related field.
• Preferred Education: Vocational Course Graduate or Associate’s Degree
• Required Experience: 1 year of experience in equipment operation, troubleshooting, or device assembly in a manufacturing environment.
• Preferred Experience:
  • 3 years of experience as a Production or Equipment Technician in semiconductor, photonics, or electronics manufacturing.
  • Experience with automated machinery, sensors, pneumatic systems, or robotic handling equipment.
  • Experience with microscopes, soldering, hand tools, and measurement instruments.
  • Familiarity with failure mode analysis, rework processes, or quality control methods.
• Software/Hardware Knowledge:
  • Basic to intermediate computer literacy (Excel, Access, or equivalent data entry tools).
  • Understanding of basic programming, PLC, or CAD software is a plus.

• Strong mechanical and electrical troubleshooting skills.
• Good hand-eye coordination and ability to work under a microscope.
• Excellent attention to detail and ability to follow complex procedures accurately.
• Strong communication skills for cross-department collaboration.
• Ability to multitask and prioritize under limited supervision.
• Comfortable working in repetitive, precision-based production environments

• Detail-oriented and proactive in identifying potential issues.
• Adaptable to shifting priorities in a fast-paced manufacturing setting.
• Team-oriented and committed to continuous improvement.
• Dedicated to maintaining safety, quality, and compliance standards.

• Must be comfortable working in a cleanroom environment and wearing required garments.
• No make-up or perfume is permitted in the cleanroom area